Sunday, March 14, 2010

Dissolved Air Flotation

Dissolved air flotation is a water treatment system that is used to remove suspended matter and clarify waste water so that is suitable for re-use or safe disposal. The separation of liquid and solids means oils, greases and other suspended solids are removed in a controlled environment and can be disposed of appropriately.

The removal process involved in dissolved air flotation is achieved by the use of microscopic air bubbles. These bubbles need to be less than 0.1mm in width in order to be effective in the dissolved air flotation system. Put simply these bubbles become attached to the solid particles (matter, grease, oil) that is in the water. The bubbles then float to the surface of the liquid with the solid particles attached.

Because bubbles will float immediately when placed in water the dissolved air flotation system does exactly what its name suggests – dissolves air into the liquid by using pressure. The pressure keeps the bubbles suspended in the wastewater and ensures the particles that lie throughout the liquid attach to the bubbles. The dissolved air remains in the liquid until the pressure is released to atmospheric pressure. This release causes the air to come to the surface and out of the solution in the form of microscopic bubbles. The solids then form a “blanket” over the top of the water which can then be skimmed and removed.

 
Dissolved air flotation is widely used in a variety of industries for the treatment of industrial wastewater. Some of these industries include oil refineries, petrochemical plants, chemical plants, natural gas processing plants and other similar industrial facilities. The system of dissolved air flotation as been commercially used since the early 1960’s. Since then the systems have been refined and are much more reliable and will continue to advance as new systems and technologies are discovered and introduced.

Baldwin Industrial Systems Pty Ltd has extensive industry experience and know-how when discussing the development and implementation of dissolved air flotation systems. Their experience is unparalleled in this industry. Baldwin’s is committed to their clients and to solving their waste water problems. Their service starts with a thorough evaluation of your process, the components contributing to the generation of waste water, and continues through to equipment selection, design, final commissioning and operation training. By selecting a Baldwin dissolved air flotation unit you can be sure that your wastewater problems will dissolve.

Call them today on Ph: 02 9545 2811 or visit their website at www.baldwin.com.au where you can read their dissolved air flotation brochure. Find their online contact form at www.baldwin.com.au/ContactUs/enews.aspx

Plate Separator

Baldwin Industrial Systems Pty Ltd has supplied over 200 plate separator systems to clients during their 18 years in operation. Baldwin offer two varieties of coalescing plate separators: 1. Small Packaged units, and 2. Large Designed units. These coalescing plate separators are extremely efficient in the removal of oils, greases and suspended solids from waste water. The large systems can be either in in-ground pits or above ground tanks. Each variation comes with a discharge water quality that is suitable for disposal into sewers or storm water.

The small packaged units of coalescing plate separators are most applicable for the automotive industry- workshops, lubebays, washbays, parts cleaning, degreasing, floor scrubbers, panel beating and radiator repairs. These smaller systems are built to be tough and compact and efficient in the removal of oil, grease, suspended solids, dust and other particles. The small packaged units have everything your need from a coalescing plate separator and the package includes pumps, level controls and low voltage panels. They have been specifically designed to prevent blocking and are approved by most Australian authorities. Baldwin also offers a variety of sizes and configurations to meet your personal needs.

The large designed units of coalescing plate separators are most suitable for larger industries including the petroleum industry (refineries, terminals, depots, service stations, workshops), the mining industry (heavy vehicle washpads, lube bays, workshops), and power stations (storm water runoff, process recycling, solids settling). Baldwin has supplied coalescing plate separators to many industries and attributes their success to the fact that they design each system to meet their client’s individual needs.

 
The theory behind the coalescing plate separator system of waste water treatment is Stokes’ law. Stokes’ law is the physical law governing the rise and fall rate of a droplet or particle in a fluid stream. It predicts the time taken for the settling of solid particles and the rising time of oil droplets. Each has specific gravities higher or lower than that of the main fluid. Baldwin’s coalescing plate separators intercept the oil droplets and bring them to the surface whilst suspended solids are also intercepted and drop to the bottom and form sludge, making both easier to remove from the waste water.  
 
Baldwin prides itself on the many key benefits of their coalescing plate separator systems as well as their many additional services in the industrial wastewater treatment market. Besides their superior product selection they can also offer: service & maintenance; installation & commissioning; site assessment; pilot plants; and performance prediction. 

So if you’re looking to install coalescing plate separator system to manage your waste water then give Baldwin a call today. They are more than happy to answer any questions you may have. Call them on Ph: 02 9545 2811 or visit their website at www.baldwin.com.au. They can also be contacted via their online contact form at www.baldwin.com.au/ContactUs/enews.aspx. 

Waste Water Treatment Systems

Waste water treatment systems involve the mechanisms and processes used when treating contaminated water, or waste water. It refers to water that has been contaminated in some way by anthropogenic industrial or commercial activities, that is the chemical or biological wastes produced as a by-product of human activities. Waste water treatment systems take their effect prior to the release of waste water back into the environment or its re-use.

By implementing waste water treatment systems factories/mines/businesses will not only save money but are showing that they more environmental sensitivity. Most industries today produce elements of wet waste and it is important they take responsibility for it by minimizing it, recycling it or eliminating it.

At Baldwin they will make the process of installing a waste water treatment system as streamlined and as hassle free as possible. They also guarantee that they will deliver all waste water treatment systems on time and on budget.

Waste water treatment systems are vital to the environment and their continual existence and growth. Waster water treatment systems reduce the disposal of paint, oil, grease, solids, heavy metals and surfactants, just to name a few, into our water ways and therefore into our water recreational areas. By eliminating theses contaminants our waterways are cleaner and safer and reduce the risk of illness amongst those who use them.

Baldwin has been designing, building and operating waste water treatment systems since 1988 and are proud of their systems. They have supplied over 2000 specialised systems during their 20 plus years in business to a large range of business types. Their range of jobs have included: large refinery station and workshop upgrades; heavy vehicle washbays at mine sites; coolant recycle and disposal at steel mills; cosmetic factories; stormwater management in power stations; and management of construction site runoffs.
 
The array of experience demonstrated by Baldwin Industrial Systems Pty Ltd makes them the number one choice when looking for management of your waste water treatment systems. They are happy to answer all your questions and discuss all your requirements no matter how big or small. Call them today on Ph: 02 9545 2811 or visit their website at www.baldwin.com.au where you can read case studies and view their range of waste water treatment systems and equipment. Find their online contact form at www.baldwin.com.au/ContactUs/enews.aspx. Do your bit for the environment and install a waste water treatment system today. 

wastewater treatment systems

Waste water is created when factory or mining equipment (vats, tanks, trucks) is cleaned or washed out, or runs off during a machine processing system. The water used to clean and process becomes contaminated and is then referred to as waste water. Special waste water equipment is required to clean this water so that is reusable or can be safely disposed of down sewers.

It is illegal to dispose waste water that was not been treated and where permission has not been granted by local officials. Therefore for the sake of the law and the health and safety of others it is vital industries that produce waste water install efficient and reliable waste water equipment.

Baldwin Industrial Systems Pty Ltd have 18 years experience in the development, production and installation of waste water equipment in a variety of business types, some of which include paint factories and wash down areas in mining areas. Since 1988 Baldwin has been developing waste water equipment for industrial wastewater treatment systems. Some of their waste water equipment includes:

-          Coalescing Plate Separators (CPS) - enhanced gravity separators that are extremely efficient in the removal of “free” oils and greases. It also targets suspended solids in wastewater streams. 

-          Oil Skimmers – the range of oil skimmer equipment consists of Floating, Continuous Belt, Disk and Tube skimmers which all come in various sizes and materials.

-          Fine Filtration – fine filtration filters available at Baldwin’s come in various types of media and cartridge. They are available for “polishing” effluents to provide a very clean discharge quality. They are ideal for recycling operations or irrigation systems.

 
Dissolved Air Flotation systems, Specialty Chemical Treatments and Electro Ionisation systems are also available through Baldwin’s waste water equipment sector.

Every piece of waste water equipment produced by Baldwin is guaranteed, hassle free and designed with the client’s requirements in mind so you can be sure you are getting a truly reliable piece of equipment.

To talk to Baldwin about their full range of waste water equipment contact them today and they will be happy to answer any of your questions. Alternatively you can visit their website and read some of their case studies from some of their happy clientele.
Ph: 02 9545 2811